Laminated Film Raw Material For Flexible Duct

Categories Polyester Laminated Aluminum Foil, Flexible Duct

Color: Silver

Slitting Width: 5-50mm

PET Thickness: 0.012-0.05mm

AL Thickness: 0.006-0.05mm

OD: 100-700mm

ID: 38/53/76/152mm

Introduzione al prodotto

Laminated film raw material for flexible ducts uses 1235 aluminum alloy because the alloy is soft, has good expansion and bending properties, and increases durability. The aluminum foil has good self-sustaining properties, will not rebound after installation, and can maintain the flatness of the duct. In addition, the aluminum material is also flame retardant.
Used for high and low pressure air conditioners, ventilation systems, and smoke exhaust from range hoods.
Duct outer diameter: 50-600MM Applicable temperature: -30℃-150℃

Our slitting tolerance is within 0.5 mm. Too large tolerance will cause the aluminum foil to fall too large or too small during duct production, affecting the glue coating width, thereby affecting the firmness and aesthetics of the duct.
The slitting width of the aluminum foil is affected by the diameter of the duct and the spacing of the steel wires. Different diameters correspond to different widths of aluminum foil. When using single side aluminum foil to make ducts, it is best to face the aluminum foil inward to increase fire resistance.

Specifiche del prodotto

Colore:

Sliver

Inner Diameter(mm):

38/53/76/152

Slitting Width(mm):

5-50

Outside Diameter(mm):

100-700

PET Thickness(mm):

0.012-0.05

AL Thickness(mm):

0.006-0.05

Structure:

Mostra del prodotto

Applicazioni del prodotto

Foto di prodotti e imballaggi

Perché scegliere noi

Yongsheng Aluminum è un produttore e fornitore leader di prodotti in alluminio in Cina con 25 anni di esperienza nell'esportazione. L'eccezionale qualità dei prodotti, il prezzo e la consegna sempre puntuale ci hanno permesso di conquistare molti partner a lungo termine e di guadagnare una grande reputazione in tutto il mondo. Forniamo una soluzione unica per i prodotti in alluminio CC&DC.